Cisco Headend Digital Broadband Delivery System
Chapter 7 DNCS Web Services Security
92
4034689 Rev A
8 After the DNCS is configured, you can verify that the DNCS HTTP-S server
certificates are deployed correctly and the STB Staging web service is accessible
by completing the following steps.
a Use a web browser to access the following site:
by completing the following steps.
a Use a web browser to access the following site:
https://[ip_address_of_DNCS_host]/dncs/soap/loadPIMS
Result: The web browser should prompt you to accept the certificate but
warn that the certificate was issued by a company that you have not chosen
to trust, similar to this example:
warn that the certificate was issued by a company that you have not chosen
to trust, similar to this example:
b Select the necessary confirmation buttons to allow the web connection to
continue.
c If the STB Staging web service is configured for basic user authentication, a
username and password prompt should display. Enter a valid STB Staging
username and password.
username and password.
d If the computer you are using for the test has an IP address that is allowed to
access the web service, the browser will return a HTTP GET method not
implemented
implemented
error message.
9 If you receive a different error message, review all configuration changes against
the previously executed procedures and repeat this procedure.