Cisco Cisco Digital Service Access Node (DSAN) 8200 Installation Guide
Using CLI Diagnostics
OL-29943-01
75
3 Power up the PC laptop, open a serial communications utility, and make the
following settings:
115.2 kbps
8 data bits
1 stop bit
No parity
Flow Control = None
To Log In to the DSAN CLI
Complete the following steps to log in to the DSAN CLI.
1
1
Apply power to the DSAN and allow up to 2 minutes for the following prompt
to appear on the PC laptop screen.
to appear on the PC laptop screen.
2 At the login prompt, type dsan and then press Enter. The following prompt
appears:
3 At the password prompt, type dsan1234 and then press Enter. The following
prompt appears: