Cisco Headend System Release 2.7
Chapter 4 Disabling OSM Automux
58
4017541 Rev B
Verify Program Numbers
Complete these steps to verify that all BFS QAMs use the same program number for
the OSM session.
the OSM session.
Finding Program Numbers on Systems Using a BFS BIG
1 On the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click BIG. The BIG List window opens.
3 Select the headend corresponding to your primary BFS QAM.
4 On the File menu, click Open. The Set Up BIG window opens.
5 Click PAT Configuration. The BIG PAT window opens.
3 Select the headend corresponding to your primary BFS QAM.
4 On the File menu, click Open. The Set Up BIG window opens.
5 Click PAT Configuration. The BIG PAT window opens.
6 Check and record the Program Number for the OSM session in the BIG PAT
table.
7 Program Number for OSM Session: ____________
8 Close the BIG PAT window, the Set Up BIG window, and the BIG List window.
9 Go to Verifying Program Numbers (on page 60).
8 Close the BIG PAT window, the Set Up BIG window, and the BIG List window.
9 Go to Verifying Program Numbers (on page 60).