Cisco Headend System Release 2.7

Chapter 2 Install the Services Portal

78-745238-01 Rev D



INFORMIXSERVER — The alias of the computer where Informix is located.



DNCSDB — The name of the DNCS database.

8 Do the DNCS_HOST and APPSERV_HOST values match the values you

recorded in Recording Server Configuration Information (on page 56)?



If yes, go to the next step.



If no, change the appropriate values and then go to the next step.

9 Widen the xterm window to the entire width of your screen. This helps you see

the remaining steps clearly.

10 Type the number corresponding to APPURL.
11 Retype the entire SAM URL, making the appropriate changes as detailed in the

following steps.
a Add the version number of the Services Portal client (3.0.1.x) immediately

after the ispguide.ptv; parameter. Use the format version=x.x.x.x

Example: If you are using Services Portal client version 3.0.1.5, type

version=3.0.1.5 (type the periods).

b Add the EID number (package number) immediately following the version

number parameter. You recorded the EID earlier in this document. Use the

format EID=#.

c We recommend that you download the Services Portal onto the set-tops as

part of the boot procedure. However, if you experience a significant increase

in boot time, you can set loadOnBoot to false (F).

Do you want to load the application on boot?
–

If yes, leave loadOnBoot=T.

–

If no, change the parameter to loadOnBoot=F.

Example:
bfs://SP_ib/ispguid.ptv;version=3.0.1.5; EID=2;obstructedRect=0,0,639,479;

loadOnBoot=T

Important: This information should appear continuously on one line. Do not

insert any spaces.

12 Type c and press Enter to continue the installation. The software begins loading

and the system displays an installation of SAIisp was successful message when

it has completed.

13 In the xterm window, type cd / and then press Enter. The root directory becomes

the working directory.

14 Type eject cd and then press Enter. The system ejects the CD.
15 Go to

Save the Configuration (on page 35).