Cisco Headend System Release 2.7
Chapter 2 Install the Services Portal
42
78-745238-01 Rev D
Install RNG/Linux Set-Top Support
Follow the instructions in this section to set up support for the RNG/Linux set-tops,
which requires the following steps:
1 Acquire the ptv file from the FTP server.
2 Copy the ptv file to the correct directory.
3 Set up the BFS client for the RNG/Linux ptv file.
4 Set up the SAM service for the RNG/Linux ptv file.
This section contains procedures for each of these steps.
1 Acquire the ptv file from the FTP server.
2 Copy the ptv file to the correct directory.
3 Set up the BFS client for the RNG/Linux ptv file.
4 Set up the SAM service for the RNG/Linux ptv file.
This section contains procedures for each of these steps.
Acquiring and Copying the RNG/Linux ptv File to the Correct Directory
1 In the Application Server xterm window, type cd /export/home/dncs/download
1 In the Application Server xterm window, type cd /export/home/dncs/download
and press Enter.
2 Log on to the FTP server.
Notes:
The address of the server is ftp.sciatl.com or 192.133.243.133.
Note: The address for the FTP server is subject to change. If you are unable to
Note: The address for the FTP server is subject to change. If you are unable to
reach the FTP server, please contact Cisco Services for the latest address.
The username is anonymous.
The password is the e-mail address of the person logging in.
3 Type cd /pub/scicare/RELEASED/ServicesPortal/Linux_RNG and press Enter.
4 Type bin and press Enter. The system sets the ftp transfer mode to binary.
5 Type hash and press Enter. The system configures itself to display hash marks
4 Type bin and press Enter. The system sets the ftp transfer mode to binary.
5 Type hash and press Enter. The system configures itself to display hash marks
that show file-transfer progress.
6 Type prompt and press Enter. This command turns off the interactive mode of
the FTP utility.
7 Type get ispguid.ptv and press Enter.
Note: This command starts the transfer of the file from the FTP server to the
Application Server. A # symbol displays on the screen for each 8192 bytes
transferred from the FTP server to the Application Server or DNCS.
8 When the download is complete, type bye and press Enter to log out of the FTP
server.
9 Go to the directory that contains the RNG/Linux ptv file by typing the following
command and pressing Enter.
cd /export/home/dncs/download
cd /export/home/dncs/download
10 Move the RNG/Pace ptv file to the cpu3 directory by typing the following
command and pressing Enter.
mv ispguid.ptv /dvs/appFiles/ServicesPortal/cpu3
mv ispguid.ptv /dvs/appFiles/ServicesPortal/cpu3
11 Go to
Setting Up the BFS Client for the Additional ptv Files (on page 43).