Cisco Headend System Release 2.7
Chapter 11 Brand Your Services Portal
122
78-745238-01 Rev D
Position or Hide Your Logo
When you configure SARA, you have the option of adding your logo to the IPG
(Interactive Program Guide). If you added your logo in SARA, this logo
automatically appears in the upper left corner of the Services Portal. The default
coordinates for the logo for both launch modes are:
x = 210
y = 145
If you want to reposition your logo for the Services Portal, you can reposition your
logo in the Display Information tab. If the Services Portal logo is embedded in a
custom background image, position the logo at x=0, y=0 so that the logo does not
display on top of your background image.
Note: While you can reposition your existing logo in the Services Portal, you cannot
Note: While you can reposition your existing logo in the Services Portal, you cannot
add your logo through the Services Portal.
Positioning Your Logo
1 From the SP Service Guide, click the Display Information tab.
2 Enter the desired x and y coordinates for your MSO Logo. These coordinates are
2 Enter the desired x and y coordinates for your MSO Logo. These coordinates are
relative to a 320 x 240 screen resolution.
Note: If you are using Services Portal with high-resolution graphics, enter these
Note: If you are using Services Portal with high-resolution graphics, enter these
values as if they are low-resolution graphics. Services Portal will display the
graphics correctly in the high-resolution versions.
3 On the File menu, click Save to save your changes.
4 View the results in the Services Portal. If you need to adjust the position, enter
4 View the results in the Services Portal. If you need to adjust the position, enter
and save new x and y coordinates until the position is where you prefer.
Important: You can click the Reset to Default button to return to the default
Important: You can click the Reset to Default button to return to the default
settings. Clicking this button resets all of the fields in the Display Information
tab. Therefore, before you click Reset to Default, record any customized settings
that you want to keep.
Hiding Your Logo
Complete these steps if you do not want to show your MSO logo or if your logo is
embedded in a custom background image.
1 From the SP Service Guide, click the Display Information tab.
2 For the MSO Logo coordinates, enter x=0 and y=0.
3 On the File menu, click Save.
1 From the SP Service Guide, click the Display Information tab.
2 For the MSO Logo coordinates, enter x=0 and y=0.
3 On the File menu, click Save.