Cisco Model D-PCG1000 PowerKEY CAS Gateway User Guide
Chapter 6 Setting Up the Interactive Program Guide
92
4038418 Rev
C
Adjust How DHCTs Use IPG Memory
This section provides instructions for sending IPG Memory Usage settings to
DHCTs. Sending these settings to DHCTs allows you to fine tune how DHCTs use
IPG memory. You can use either of the following methods to send these settings to
DHCTs:
DHCTs. Sending these settings to DHCTs allows you to fine tune how DHCTs use
IPG memory. You can use either of the following methods to send these settings to
DHCTs:
Global: Sends the settings to all DHCTs in your network.
Hub-Specific: Sends the settings to DHCTs in a specific hub. This method allows
you to test the settings on DHCTs in the headend before applying the settings to
all DHCTs in your network.
you to test the settings on DHCTs in the headend before applying the settings to
all DHCTs in your network.
This section also provides instructions for modifying settings for a hub and for
changing hub settings to global settings.
changing hub settings to global settings.
Sending IPG Memory Usage Settings to All DHCTs in a Specific Hub
Sending settings to all DHCTs in a hub requires that you first enable the settings for
use on a hub-specific basis. Once hub-specific settings are enabled, you can
configure each setting for any hub in your network. Until you enable these settings,
they will be unavailable for you to configure and send to DHCTs in a specific hub.
use on a hub-specific basis. Once hub-specific settings are enabled, you can
configure each setting for any hub in your network. Until you enable these settings,
they will be unavailable for you to configure and send to DHCTs in a specific hub.
To Enable Hub-Specific Memory Usage Settings
Follow these instructions to enable hub-specific IPG Memory Usage settings.
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click DHCT Config. The DHCT Configure Prompt window opens.
3 Click Hub. The DHCT Configure Prompt window displays all of the hubs in
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click DHCT Config. The DHCT Configure Prompt window opens.
3 Click Hub. The DHCT Configure Prompt window displays all of the hubs in
your network along with their IDs and configurations.
4 Click File and choose Select Hub Specific-Items. The Select Hub-Specific Items
window opens.