Cisco Model D-PCG1000 PowerKEY CAS Gateway User Guide
Chapter 8 Enabling Power On Features
120
4038418 Rev
C
6 Click the Base Application tab.
7 Select the checkbox beside Power On Channel Selective Override. This setting
allows you to send power-on channel updates to most of your subscribers
without affecting subscribers who have chosen their own power-on channel.
without affecting subscribers who have chosen their own power-on channel.
8 Use the Power On Channel fields on the Base Applications tab to set the default
power-on channel.
9 Click Save. At the bottom of the screen, "DHCT Configuration successfully
saved" will confirm the new setting.
10 Click the General Settings tab again, and re-select the checkbox beside Power
On Channel.
11 Click Save. At the bottom of the screen, "DHCT Configuration successfully
saved" will confirm the new setting.
12 Click Cancel to close the Set Up Global DHCT Configuration window.
Configuring Power On Channel Selective By Hub
If necessary, you can also configure the power-on channel and the power-on channel
selective override features differently for individual hubs.
selective override features differently for individual hubs.