Cisco Cisco Digital Service Access Node (DSAN) 8210 Installation Guide
Chapter 2 Installation
10
4035812 Rev B
Installing the DAXI
You can install the DAXI and its power supply in any of the following ways:
On a shelf
On a wall
In a 19-inch equipment rack
The following procedures explain how to install the DAXI using each method.
Note: Wall or rack mounting requires accessory kit part number 4036620, available
separately.
separately.
To Install the DAXI on a Shelf
Complete the following steps to install the DAXI on a shelf.
1 Carefully select and prepare the area to receive the DAXI.
1 Carefully select and prepare the area to receive the DAXI.
For proper ventilation, choose a location that allows at least 1 inch of free
space at the rear and on each side for cooling air to exit the unit.
space at the rear and on each side for cooling air to exit the unit.
For proper ventilation, choose a location that allows at least 6 inches of free
space at the front for air to enter the unit.
space at the front for air to enter the unit.
Consider the weight of the DAXI and all attached cabling and accessories.
Consider any possible accidental impact from passing foot traffic or moving
objects. Avoid mounting the unit in high-traffic areas.
objects. Avoid mounting the unit in high-traffic areas.
Consider any additional stress that may be placed on the mounting surface
and hardware by accidental snagging of attached cabling.
and hardware by accidental snagging of attached cabling.
2 Position the DAXI on the shelf.
3 Proceed to Connecting Cables to the DAXI (on page 14).
3 Proceed to Connecting Cables to the DAXI (on page 14).