Cisco Cisco Digital Service Access Node (DSAN) 8200 Installation Guide

 

14 

4035812 Rev B 

All input, output, and power connections to the DAXI are made via the DAXI back 
panel, as shown in the following illustration. 

 

 

 

Insert the plug from the ASI cable in the jack labeled ASI OUT at far left on the DAXI 
back panel. 

Note: To allow for connection to an outside DSAN, the ASI output port is surge 
protected, and the length of the ASI cable from DAXI to DSAN can be up to 250 
meters of Belden 8281 or equivalent. 

 

For the first auxiliary program source, connect the video output and left and right 
audio output cables to the RCA jacks marked VIDEO 1, AUDIO 1 L, and AUDIO 1 R 
on the DAXI back panel. 

For each additional program source, connect the video and audio output cables to 
the appropriate RCA jacks on the DAXI back panel. 

Note: Double-check that all RCA cables are firmly inserted into their respective 
jacks. These non-locking connectors can back out easily. Be especially mindful of this 
using a BNC to RCA adapter on the video cable. 

 

Insert the plug from the +12 VDC power supply in the jack labeled +12V at far right 
on the DAXI back panel.