Cisco Cisco Digital Service Access Node (DSAN) 8210xHPF Installation Guide

 

12 

4035812 Rev B 

2  Using the wall-mounting bracket as a guide, mark the location of four screw 

holes in the mounting surface. Prepare the screw holes for installation as needed, 
possibly by drilling pilot holes or installing wall anchors. 

3  Install four #8 mounting screws (not provided) in the holes. Choose a thread 

type suitable for the wall material, and leave the heads at least three threads 
from the mounting surface. 

4  Attach the mounting bracket (part number 4033734, included in accessory kit 

part number 4036620) to the DAXI as follows: 

 

Place the DAXI upside-down on a firm surface with the DAXI wall-mounting 
bracket resting loose on top. 

 

If necessary, flip the mounting bracket to position its keyed mounting holes 
correctly with respect to gravity in the final installation. For example, when 
mounting the DAXI facing left, position the keyed mounting holes so the 
bracket slides over and down to lock behind the heads of the wall mounting 
screws. 
 

 

 

 

Align the four mounting holes in the wall mounting bracket with the 
mounting holes in the bottom of the DAXI. 

 

Install four #8-32 flat-head screws through the mounting bracket and into the 
threaded holes in the bottom of the DAXI. 

5  Holding the DAXI housing in its final orientation, slip the keyed holes in the 

mounting bracket over the heads of the wall-mounting screws installed earlier. 

6  Proceed to Connecting Cables to the DAXI (on page 14).