Cisco Headend System Release 2.7 Design Guide
DNCS Configuration for MFM
4012166 Rev B
19
Configuring MFM on the DNCS
Important! The MFM feature must be enabled on the DNCS. If you do not see the
MFMC feature, please contact Cisco Services.
1 From the DNCS Administrative Console, click Network Element Provisioning,
MFMC feature, please contact Cisco Services.
1 From the DNCS Administrative Console, click Network Element Provisioning,
and then click MFMC. The Multiflow Multicast: System Wide OOB IP Flow
window opens.
window opens.
2 From the IP Recommended Range section, click the IPV4 Org. Local Scope box.
Notes:
It is recommended that the operator use IP addresses from the Local Scope
range.
range.
If Source Specific Multicast (SSM) is enabled on the network, select the IANA
Reserved SSM option.
Reserved SSM option.
If you do not select an option, you can use any IP address within the 225.0.0.0
to 239.255.255.255 range that is not reserved by the IANA.
to 239.255.255.255 range that is not reserved by the IANA.