Cisco Headend System Release 2.7 Design Guide
Chapter 2 Guidelines for Configuring the DBDS for Multicast and Advanced DSG Mode
26
4012166 Rev B
Example: No Straddle or Regionalization
The following list describes various command lines within the example:
Lines 2-3 define the client list.
Lines 4-8 define the DSG tunnels.
Lines 9-18 define the destination IP address and port (classifiers).
Lines 36-38 and 67-69 statically configure IGMP on the RF interface that forwards
IP multicast traffic.
IP multicast traffic.
Lines 39 and 70 enable DCD.
Lines 40 and 71 specify Rule 1 priority, clients, and tunnel.
Lines 41 and 72 specify Rule 1 classifiers.
Lines 42 and 73 specify Rule 2 priority, clients, and tunnel.
Lines 43 and 74 specify Rule 2 classifiers.
Lines 44 and 75 specify Rule 3 priority, clients, and tunnel.
Lines 45 and 76 specify Rule 3 classifiers.
1
ip multicast-routing
2
cable dsg client-list 1 id-index 1 mac-addr 0001.a6d0.0b1e
3
cable dsg client-list 1 id-index 2 ca-system-id E00
4
cable dsg tunnel 1 mac-addr 0100.5e40.0001
5
cable dsg tunnel 2 mac-addr 0100. 5e40.010a
6
cable dsg tunnel 3 mac-addr 0100. 5e40.0164
7
cable dsg tunnel 4 mac-addr 0100. 5e40.020a
8
cable dsg tunnel 5 mac-addr 0100. 5e40.0264
9
cable dsg cfr 1 dest-ip 239.192.0.1 tunnel 1 dest-port 2000 13821 priority 0
src-ip 10.253.0.1
10
cable dsg cfr 2 dest-ip 239.192.1.10 tunnel 2 dest-port 2000 13821 priority 0
src-ip 10.253.0.1
src-ip 10.253.0.1
11
cable dsg cfr 3 dest-ip 239.192.1.100 tunnel 3 dest-port 2000 13821 priority 0
src-ip 10.253.0.1
src-ip 10.253.0.1
12
cable dsg cfr 4 dest-ip 239.192.2.10 tunnel 4 dest-port 2000 13821 priority 0
src-ip 10.253.0.1
src-ip 10.253.0.1
13
cable dsg cfr 5 dest-ip 239.192.2.100 tunnel 5 dest-port 2000 13821 priority 0
src-ip 10.253.0.1
src-ip 10.253.0.1
14
!
15
interface FastEthernet0/0