Cisco Headend System Release 2.7 User Guide
Chapter 2 Add New BFS Sources
20
4001182 Rev B
Setting Up a New Non-SA Digital Source
1 From the Source Definition List window, click File and select New non-SA
1 From the Source Definition List window, click File and select New non-SA
Digital. The Set Up Non-SA Digital Source Definition window opens.
2 From the Distribution option, select Default or Hub.
3 Did you select Hub as the distribution type?
3 Did you select Hub as the distribution type?
If yes, click the arrow in the Hub Name field and select the appropriate hub.
If no, go to step 4.
4 For the MPEG Program Number, enter the MPEG program number that you
want to assign to the video stream.
5 For the Channel Center Frequency, enter the appropriate frequency for the
tuner.
6 For the Modulation Type, click the arrow to select the appropriate digital
transmission type.
7 For the Modulation, click the arrow to select the appropriate QAM modulator.
8 Click Save. An Information message appears and informs you that you must
8 Click Save. An Information message appears and informs you that you must
restart SI Manager to reflect any non-SA source definitions.
Note: You will restart SI Manager at the end of this procedure.
Note: You will restart SI Manager at the end of this procedure.
9 Click OK. The NonSA source is added to the Source Definition List window.