Cisco Headend System Release 2.7 User Guide
Create a BFS Source for a New Inband or Out-of-Band Carousel
4001182 Rev B
23
4 Click File and select New. The Set Up BFS Source window opens.
5 Click in the Source Name field and type a name that describes the data carousel.
6 Click in the Source ID field and enter a value that is greater than 200 and record
6 Click in the Source ID field and enter a value that is greater than 200 and record
it here: _____
Important! If this is an inband source, Cisco recommends that you enter the
same source ID that you recorded in step 11 of the Adding a New Inband
Carousel to the BIG PAT Table (on page 13) procedure.
Notes:
Important! If this is an inband source, Cisco recommends that you enter the
same source ID that you recorded in step 11 of the Adding a New Inband
Carousel to the BIG PAT Table (on page 13) procedure.
Notes:
Enter an even number for an inband source and an odd number for an out-
of-band source.
of-band source.
Sessions 1 to 200 are reserved for system-built sessions.
For recommendations on selecting a source ID, see Select a Source ID for the
New BFS Source (on page 9).
New BFS Source (on page 9).
7 For Source Type, select BFS.
8 For Transport Type, select the appropriate choice from one of the following
8 For Transport Type, select the appropriate choice from one of the following
options.
For a DBDS that includes a BIG, select In-band or Out-of-band.
For a DBDS that includes an ASI card, select ASI In-band or Out-of-band.