Cisco Headend System Release 2.7 User Guide
Chapter 3 Delete BFS Sources
36
4001182 Rev B
Verify the Number of Sessions Before Deleting an
Inband Source
Inband Source
Overview
When a source is deleted from the system, the session count on the QAM carrying
that inband source will decrease. By verifying the session count prior to deleting an
inband source, you can determine whether the inband source was successfully
deleted at the end of these procedures.
that inband source will decrease. By verifying the session count prior to deleting an
inband source, you can determine whether the inband source was successfully
deleted at the end of these procedures.
Verifying the Number of Sessions on the QAM
Important! If your system is running in an RCS environment, you will need to locate
the respective QAM that is carrying the session you wish to delete.
1 Facing the front of the QAM modulator, press the OPTIONS button to cycle
the respective QAM that is carrying the session you wish to delete.
1 Facing the front of the QAM modulator, press the OPTIONS button to cycle
through the QAM menu screens until you see the Session Count screen.
Example: The following diagram shows an example of the Session Count screen.
Example: The following diagram shows an example of the Session Count screen.
2 Record the number of sessions in the space provided.
Total Session Count: _______
Note: The session count will be referenced after you have completed the
remaining procedures in this chapter. This value will allow you to verify that
you have successfully deleted all sessions on the QAM after you have changed
its configuration.
Note: The session count will be referenced after you have completed the
remaining procedures in this chapter. This value will allow you to verify that
you have successfully deleted all sessions on the QAM after you have changed
its configuration.