Cisco Model D-PCG1000 PowerKEY CAS Gateway User Guide
6-10
Sending DHCT Configuration
749606 Rev D
Sending a Configuration to All DHCTs in a Single Hub
Introduction
A hub configuration lets you configure the operating parameters for all of the
DHCTs within a specific hub. This is especially useful for configuring PPV barkers
for different geographic areas. You can offer different local numbers for subscribers
to call to order PPV events, based on the area where the subscriber lives.
This section provides instructions to set up and send a configuration to all of the
This section provides instructions to set up and send a configuration to all of the
DHCTs in a single hub.
Selecting the Options that You Can Set Within a Hub
Before you can send a configuration to all DHCTs in a hub, you must first specify the
options that you will be able to set on a hub-specific basis. All DHCTs receive the
global configuration. Hub-specific configurations override only those global items
that you choose as hub-specific items.
For example, if you want to set up a different unauthorized barker for each hub, you
For example, if you want to set up a different unauthorized barker for each hub, you
must specify the unauthorized barker as a hub-specific option. You will only be able
to set options that you specify in this procedure.
Follow these steps to select the options that you can set within a hub.
Follow these steps to select the options that you can set within a hub.
1.
On the DNCS Administrative Console, select the Server Applications Tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window appears.
Result: The DHCT Configure Prompt window appears.