Cisco Model D-PCG1000 PowerKEY CAS Gateway User Guide
Enable DVS Support
4023142 Rev B
29
Enabling and Disabling DVS Support on a Hub
DVS can be selectively enabled or disabled on hubs. DVS support settings at the hub
level will override the global configuration.
Important: DVS support must be enabled globally before the hub can be configured.
Important: DVS support must be enabled globally before the hub can be configured.
If you have not enabled DVS support on the system, return to Enabling Global DVS
Support (on page 27) before you attempt the following steps.
When setting Hub-level control of DVS support, you will first enable DVS support in
When setting Hub-level control of DVS support, you will first enable DVS support in
the UI. Then you can choose to enable or disable DVS support on the hub.
Enable the DVS Support in the UI
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click the DHCT Config button. When the DHCT Configure window opens,
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click the DHCT Config button. When the DHCT Configure window opens,
select Hub.
3 Click File and choose Select Hub-Specific Items.
4 In the Select Hub-Specific Items window Click the General Settings tab.