Cisco Model D-PCG1000 PowerKEY CAS Gateway User Guide
4019301 Rev B
Adding a dvd Server to the BFS and Updating the dvd Server With New Files
8-1
Chapter 8
Adding a DVD Server to the BFS and
Updating the DVD Server With New Files
Overview
Introduction
This chapter provides procedures for adding a DVD server to the BFS and updating
the DVD server with DVD files. These files enable SARA server software to support
the DVD copying (burning) feature of Explorer set-top boxes that offer this feature.
During a system upgrade, the installer may have configured the BFS for a DVD
During a system upgrade, the installer may have configured the BFS for a DVD
server and added DVD files to the server. However, if this procedure was not
performed at the time of the upgrade, use the information in this chapter to add a
BFS DVD server and to add files to the DVD server for the first time. Also use the
information in this chapter to update a DVD server with new files when necessary.
Starting with SR 2.5/3.5/4.0 and later, a DVD server has been added to the BFS to
Starting with SR 2.5/3.5/4.0 and later, a DVD server has been added to the BFS to
support the DVD burning capability of SARA Server software. This capability is
required to fully support Explorer set-top boxes that have the ability to burn content
from the hard drive of the set-top box to the DVD drive.
Important: The instructions in this chapter provide data required to add a DVD
Important: The instructions in this chapter provide data required to add a DVD
server to the BFS. For step-by-step instructions on adding a server to the BFS, refer to
Adding and Removing Applications on the BFS for SR 2.5/3.5.
In This Chapter
This chapter contains the following topics.
Topic
See Page