Cisco Model D-PCG1000 PowerKEY CAS Gateway User Guide
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
4009747 Rev B
Adding a dvd Server to the BFS and Updating the dvd Server With New Files
8-1
Chapter 8
Adding a dvd Server to the BFS and
Updating the dvd Server With New Files
Overview
Introduction
This chapter provides procedures for adding a dvd server to the BFS and updating
the dvd server with DVD files. These files enable SARA server software to support
the DVD copying (burning) feature of Explorer set-top boxes that offer this feature.
During a system upgrade, the installer may have configured the BFS for a dvd server
During a system upgrade, the installer may have configured the BFS for a dvd server
and added DVD files to the server. However, if this procedure was not performed at
the time of the upgrade, use the information in this chapter to add a BFS dvd server
and to add files to the dvd server for the first time. Also use the information in this
chapter to update a dvd server with new files when necessary.
Starting with SR 2.5/3.5/4.0 and later, a dvd server has been added to the BFS to
Starting with SR 2.5/3.5/4.0 and later, a dvd server has been added to the BFS to
support the DVD burning capability of SARA Server software. This capability is
required to fully support Explorer set-top boxes that have the ability to burn content
from the hard drive of the set-top box to the DVD drive.
Important: The instructions in this chapter provide data required to add a dvd
Important: The instructions in this chapter provide data required to add a dvd
server to the BFS. For step-by-step instructions on adding a server to the BFS, refer to
Adding and Removing Applications on the BFS for SR 2.5/3.5.
In This Chapter
This chapter contains the following topics.
Topic
See Page