Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
4003848 Rev C
Application Server 3.1.2 Installation Instructions
2-15
Stop System Components,
Continued
Stopping the DNCS
After you stop the Application Server, complete these steps to stop the DNCS.
1. On the DNCS, click the middle mouse button and select DNCS Stop.
Result: The DNCS begins shutting down all of its processes. This takes
approximately 2 minutes to complete.
2. Open an xterm window on the DNCS.
3. At the prompt, type dncsControl and press Enter.
Result: The Dncs Control window opens.
4. Type 2 to select Startup/Shutdown Single Element Group and press Enter.
Result: A list appears of all the DNCS processes and shows their current
working states (running or stopped).
5. On the DNCS control window, press Enter to update the working states of
the DNCS processes. Continue to press Enter every few seconds until all
processes show Curr Stt: stopped(1).
Note: You will not see a status message while the processes are shutting
Note: You will not see a status message while the processes are shutting
down.
6. When all processes show Curr Stt: stopped(1), follow the on-screen
instructions to close the Dncs Control window.
7. Close any windows that may be open on the DNCS, except the xterm
window.
8. Close all remote connections to the DNCS.
9. Go to Stop the cron Jobs, next in this chapter.