Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
4003848 Rev C
Why Choose Application Server 3.1.2?
1-3
System Release Compatibility and Prerequisites,
Continued
Prerequisites
The DBDS must be operating with the following system software before you can
install Application Server 3.1.2:
•
•
SR 2.2 or SR 3.2 system software
•
SR 2.2 or SR 3.2 Service Pack 1 system software
•
SR 2.4 or SR 3.4 system software
•
SR 3.3 system software
•
DBDS Utilities Version 3.1 or later
If You Need to Roll Back
In the unlikely event that you experience a problem installing this Application
Server, the rollback process involves reinstalling the SAIapsrv and SAItools
packages for the Application Server. Follow the procedures in this section to identify
your current SAIapsrv and SAItools packages. Then locate the SAIapsrv and
SAItools CD(s) and keep them on hand so that they are readily available if you
should need to roll back.
Note: Refer to Appendix A, Application Server 3.1.2 Rollback Procedure, for
Note: Refer to Appendix A, Application Server 3.1.2 Rollback Procedure, for
instructions on reinstalling these software packages.
Complete these steps to identify your current SAIapsrv and SAItools packages.
Complete these steps to identify your current SAIapsrv and SAItools packages.
1.
In an xterm window on the Application Server, type pkginfo –l SAIapsrv
and press Enter.
Result: The current Application Server version displays.
Result: The current Application Server version displays.
2.
Write down the current Application Server version here: __________________
3.
In the same xterm window on the Application Server type pkginfo –l
SAItools and press Enter.
Result: The current SAItools version displays.
Result: The current SAItools version displays.
4.
Write down the current SAItools version here: ___________________________
5.
Locate the CD(s) and keep them on hand so that they are readily available if
you should need to roll back