Cisco Cisco Digital Service Access Node (DSAN) 8211 Troubleshooting Guide
Chapter 4 Host Registration
40
4032301 Rev A
Confirming Host Registration
After the eCM acquires an IP address and enters two-way operation, the eHost will
attempt to get SI data and system time, receive an IP address, and then download its
configuration file from a TFTP server.
attempt to get SI data and system time, receive an IP address, and then download its
configuration file from a TFTP server.
System Time Acquisition
The system time must be available before you can perform eHost registration.
System time can be obtained from either of two sources: eCM Time of Day or eHost
SI data.
System time can be obtained from either of two sources: eCM Time of Day or eHost
SI data.
SI Data Acquisition
The DSAN reports successful acquisition of SI data and system time on CLI diag
page 1.0, as shown in the following example.
page 1.0, as shown in the following example.
The eCM and eHost keep separate time clocks. The log files use the eHost time. The
eHost will obtain its time from the DNCS SI data. The default date is 1/1/1970.
eHost will obtain its time from the DNCS SI data. The default date is 1/1/1970.
Troubleshooting
If the DSAN does not obtain the SI data: