Cisco Cisco Digital Service Access Node (DSAN) 8200 Troubleshooting Guide
Chapter 4 Host Registration
44
4032301 Rev A
Additional Troubleshooting Information
If you have problems that are not addressed by the troubleshooting information in
the preceding section, the following references may be helpful.
the preceding section, the following references may be helpful.
Error Messages
One or more error messages may appear during Host registration. These error
messages will appear on CLI diag page 3.x, and are also sent via an SNMP trap.
messages will appear on CLI diag page 3.x, and are also sent via an SNMP trap.
For a listing of all DSAN error messages by category, see DSAN Error Messages (on
page 76).
page 76).
LED Status
The status LEDs on the DSAN digital board can serve as an aid to troubleshooting.
For a description of the status LEDs, see DSAN LED Indicators (on page 78).
Current DSAN Software Version Installed
When no other cause can be found, a possible fix for incomplete Host registration is
to upgrade the DSAN software. See Software Upgrade (on page 63) for details on
performing this upgrade.
to upgrade the DSAN software. See Software Upgrade (on page 63) for details on
performing this upgrade.