Cisco Headend System Release 2.7 User Guide
Install the Software
4013430 Rev B
7
Install the Software
1 Insert the Report Writer Software V4.2 CD into the CD-ROM drive of the DNCS.
2 Did the File Manager window display?
2 Did the File Manager window display?
If yes, the CD mounted successfully.
If no, type df -k to determine where the CD is mounted and then go to step 3.
3 Is /cdrom listed in the output?
If yes, go to step 4.
If no, contact Cisco Services.
4 From the xterm window where you are logged in as root, type cd /cdrom/cdrom0
and press Enter to access the cdrom0 directory.
5 Type /usr/sbin/install_pkg and press Enter.
Results:
The system lists the packages that will be installed.
A confirmation message appears asking you to confirm that you want to
proceed with the installation.
proceed with the installation.
6 Type y and press Enter to start the installation. When the installation is complete,
the system displays a message stating that the installation was successful and a
prompt for the root user appears.
Note: The installation should take less than 30 seconds.
prompt for the root user appears.
Note: The installation should take less than 30 seconds.
7 Was the installation successful?
If yes, go to step 8.
If no, contact Cisco Services.
8 From the xterm window where you are logged in as root, type exit and press
Enter. You are logged out as root user.
9 Complete one of the following steps:
a If the File Manager is present: From the File Manager window, click File
and select Eject. The CD is ejected from the CD drive and the File Manager
window closes.
window closes.
b If the File Manager is not present: From an xterm window, type the
following command: cd /.; eject; exit. The CD is ejected from the CD drive.
10 Type exit and press Enter to close the xterm window.