Cisco Headend System Release 2.7 User Guide
10
4011413 Rev B
Set Up Enhanced Channel Maps
Notes:
Check the box labeled not to exclude any criteria. For example, if you want a
channel map to be used by every DHCT model except for the Explorer 2000,
set the DHCT Hardware Model to 2000 and select the box labeled not.
channel map to be used by every DHCT model except for the Explorer 2000,
set the DHCT Hardware Model to 2000 and select the box labeled not.
Two or more sets of rules can use the same LUG ID or virtual hub.
You can find the EID for a package in the Set Up Package dialog box.
6 Click Save Rule, and then click Exit.
Notes:
The set-top must meet all criteria conditions in a rule in order to receive this
channel map.
channel map.
If a set-top meets more than one rule (and is eligible for more than one
channel map), the set-top will be assigned to the first channel map in the list
for which it meets the conditions.
channel map), the set-top will be assigned to the first channel map in the list
for which it meets the conditions.
7 Click Write File to place the modified file on the BFS.
Note: The file will be called bfs:///osm/group_defs.txt. It may take up to 15
minutes for this file to appear on the BFS.
minutes for this file to appear on the BFS.
8 Click Exit to close the window.
Changing Rules
To change an existing rule, complete the following steps.
1 In the DNCS Administrative Console, click the Application Interface Modules
1 In the DNCS Administrative Console, click the Application Interface Modules
tab.
2 Click Group Definitions. The Enhanced Channel Map Group Definition Rules
window opens.
3 Select the check box beside the rule that you want to change.