Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Data Sheet

 

_________________________________________________________________________________________________________________ 

Page 12 of 15 

 
 

 

The GS7000 Node is available in a wide variety of configurations.  The GS7000 Ordering Matrix provides ordering 
information for configured node stations.  This page contains ordering information for required and optional 
accessories.  Please consult with your Account Representative, Customer Service Representative, or 
Applications Engineer to determine the best configuration for your particular application. 
 

Plug-in Pads (attenuators) – Available in 0.5 dB steps from 0 to 20 dB 
    1 required for each Optical Receiver Module installed in the node (for Optical Interface Board) 

    1 required for each Optical Transmitter Module installed in the node (for Optical Interface Board) 

    1 required for each Reverse input path activated (for Launch Amplifier) 

589693 (0 dB) 

sequentially thru 

589734 (20.5dB) 

 

Plug-in Forward Linear Equalizers – Available in 1.5 dB steps from 0 to 21 dB. 
 
    Node shipped with 7.5 dB Linear Equalizers (2)* installed for 14.5dB of tilt to 1002 MHz (*4008782) 

4007228 (0 dB) 

 

see table below 

Plug-in Signal Directors – 2 required 
    Node shipped with Jumpers installed to activate 4 RF output ports 
 
    Optional 2-Way Splitters are required to activate 5 or 6 RF output ports 

 

4011907 

 

4011908 

Note: Configured nodes ship without reverse input pads and any of the pads on the OIB.  All other standard accessories are shipped from the 
factory. Forward Launch Amp attenuator pads, (2) 7.5 dB linear Eqs, and (2) signal director jumpers are shipped with every configured node. 

 

Node Launch Amplifier, 2-way forward segmentation, 65/86 MHz split 

4014385 

Forward Configuration Module, 1x2 

4011900 

Forward Configuration Module, 1x2 Redundant 

4011901 

Forward Configuration Module, 2x2 

4011902 

Forward Configuration Module, 2x2 Redundant 

4011903 

Forward Configuration Module, 1x2, Forward RF Injection, Redundant 

4017858 

0 dB 1GHz Forward Linear EQ 

4007228 

1.5 dB 1GHz Forward Linear EQ 

4008778 

3.0 dB 1GHz Forward Linear EQ 

4008779 

4.5 dB 1GHz Forward Linear EQ 

4008780 

6.0 dB 1GHz Forward Linear EQ 

4008781 

7.5 dB 1GHz Forward Linear EQ 

4008782 

9.0 dB 1GHz Forward Linear EQ 

4008783 

10.5 dB 1GHz Forward Linear EQ 

4008784 

12.0 dB 1GHz Forward Linear EQ 

4008785 

13.5 dB 1GHz Forward Linear EQ 

4008786 

15.0 dB 1GHz Forward Linear EQ 

4008787 

16.5 dB 1GHz Forward Linear EQ 

4019258 

18.0 dB 1GHz Forward Linear EQ 

4019259 

19.5 dB 1GHz Forward Linear EQ 

4019260 

21.0 dB 1GHz Forward Linear EQ 

4019261 

Optical Receiver, SCA connector 

4013593 

Optical Receiver, SCU connector 

4013594 

Optical Receiver, FCA connector 

4013595 

Forward Local Injection Module 

4013575