Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
Chapter 5 Maintenance
144
OL-29643-02
1 Pull up on the two module cover knurled tabs. Use a slight rocking motion.
Note: If the module is out of the housing, it is easier to hold the module in both
hands and push up on the two module cover knurled tabs with your thumbs.
You can also insert a flat blade screwdriver into the cover release tab slot on the
right side of the module housing to assist with opening the cover.
The module cover opens as shown.
hands and push up on the two module cover knurled tabs with your thumbs.
You can also insert a flat blade screwdriver into the cover release tab slot on the
right side of the module housing to assist with opening the cover.
The module cover opens as shown.
2 Pull the fiber connector straight out from the side of the module cover to remove
it.
3 Disassemble the fiber connector and pigtail for cleaning if necessary.