Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
Chapter 1 General Information
4
OL-29643-02
Functional Description
Node
The GS7000 Node is used in broadband hybrid fiber/coax (HFC) networks. It is
configured with the receivers, transmitters, configuration modules, and other
modules to meet your unique network requirements. This platform allows
independent segmentation and redundancy for both the forward and reverse paths
in a reliable, cost-effective package.
The GS7000 Node receives forward optical inputs, converts the input to an electrical
radio frequency (RF) signal, and outputs the RF signals at up to six ports. The
forward bandwidth is from 52 MHz (or 54, or 70, or 86 MHz) to 1002 MHz. The
lower edge of the passband is determined by the diplex filter and the reverse
amplifier assembly. Diplex filter choices are 52 MHz, 54 MHz, 70 MHz, 86 MHz or
105 MHz.
configured with the receivers, transmitters, configuration modules, and other
modules to meet your unique network requirements. This platform allows
independent segmentation and redundancy for both the forward and reverse paths
in a reliable, cost-effective package.
The GS7000 Node receives forward optical inputs, converts the input to an electrical
radio frequency (RF) signal, and outputs the RF signals at up to six ports. The
forward bandwidth is from 52 MHz (or 54, or 70, or 86 MHz) to 1002 MHz. The
lower edge of the passband is determined by the diplex filter and the reverse
amplifier assembly. Diplex filter choices are 52 MHz, 54 MHz, 70 MHz, 86 MHz or
105 MHz.