Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
Chapter 3 Installation
74
OL-29643-02
Tools and Test Equipment
Required Tools and Test Equipment
The following tools and equipment are required for installation.
Torque wrench capable of 5 to 12 ft-lbs (6.8 to 16.3 Nm)
4-inch to 6-inch extension for torque wrench
1/2-inch socket for strand clamp bolts and cover bolts
1/4-inch flat-blade screwdriver
#2 Phillips-head screwdriver
Long-nose pliers
1/2-inch deep-well socket for seizure connector
True-rms digital voltmeter (DVM)
EXFO FOT 22AX optical power meter with adapters
Optical connector cleaning supplies
Optical connector microscope with appropriate adapters for your optical
connectors
connectors
Node Fastener Torque Specifications
Be sure to follow these torque specifications when assembling/mounting the node.
Fastener Torque
Specification
Illustration
Housing closure bolts
5 to 12 ft-lbs
(6.8 to 16.3 Nm)
(6.8 to 16.3 Nm)
Test point port plugs
Housing plugs
Housing plugs
5 to 8 ft-lbs
(6.8 to 10.8 Nm)
(6.8 to 10.8 Nm)
Strand clamp mounting bracket
bolts
bolts
5 to 8 ft-lbs
(6.8 to 10.8 Nm)
(6.8 to 10.8 Nm)
Pedestal mounting bolts
8 to 10 ft-lbs
(10.8 to 13.6 Nm)
(10.8 to 13.6 Nm)
Module securing screws
(Tx, Rx, PS, and SM/LCM
modules)
(Tx, Rx, PS, and SM/LCM
modules)
25 to 30 in-lbs
(2.8 to 3.4 Nm)
(2.8 to 3.4 Nm)
RF Amplifier assembly shoulder
screws (cross head screw)
screws (cross head screw)
18 to 20 in-lbs
(2.0 to 2.3 Nm)
(2.0 to 2.3 Nm)