Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Chapter 2 Installing the DAVIC QPSK Demodulator
14
78-545617-01 Rev F
Unpack and Inspect the QPSK Demodulator
Introduction
This section provides the procedures for unpacking and inspecting the QPSK
demodulator.
Carrier’s Responsibility
Cisco inspects and carefully packs all products before shipment. The carrier is
responsible for safe shipping and delivery. Do not return products damaged in
transit to Cisco. Contact Cisco Service for return instructions.
Note: Retain all boxes for future equipment shipping needs. They have been
Note: Retain all boxes for future equipment shipping needs. They have been
designed for use with this equipment.
Unpacking and Inspecting Procedure
Follow these steps to unpack and inspect the QPSK demodulator.
1 Review the Safety Precautions.
2 Inspect the shipping carton for visible damage.
3 Open the shipping carton.
4 Remove all packing material.
5 Inspect the product for visible damage.
6 Inspect the box or product for loose items that may indicate concealed damage.
7 Inspect for missing parts using the packing slip as a guide.
1 Review the Safety Precautions.
2 Inspect the shipping carton for visible damage.
3 Open the shipping carton.
4 Remove all packing material.
5 Inspect the product for visible damage.
6 Inspect the box or product for loose items that may indicate concealed damage.
7 Inspect for missing parts using the packing slip as a guide.