Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Chapter 4 Operating the Modulator
82
4014102 Rev C
In the above example, App is the application code and Boot is the boot code.
This revision number for the application code (4.0.5) and the boot code
(4.0.5), represented in the above example, contains the major release number,
minor release number, and the point release number.
(4.0.5), represented in the above example, contains the major release number,
minor release number, and the point release number.
Important! If an asterisk (*) appears after one of the code version numbers, this
indicates that the code version is a mismatch to the GQAM software package
version.
indicates that the code version is a mismatch to the GQAM software package
version.
2 Press ENTER to return to the default screen.
Viewing the Module Revision Numbers
The Module Revision screen displays the revision numbers for the hardware and
software of the selected RF channel. To display the Module Revision screen,
complete the following steps.
1 Press OPTIONS until the Module Revision screen appears.
software of the selected RF channel. To display the Module Revision screen,
complete the following steps.
1 Press OPTIONS until the Module Revision screen appears.
Notes:
SW shows the RF board microprocessor firmware revision displayed as
major release and minor release.
major release and minor release.
If an asterisk (*) appears after one of the code version numbers, this indicates
that the code version is a mismatch to the GQAM software package version.
that the code version is a mismatch to the GQAM software package version.
Mode is the PWB assembly of configuration. The 0 indicates a
Standard/Domestic Mode (Baseband to RF Output) PWB assembly.
Standard/Domestic Mode (Baseband to RF Output) PWB assembly.
2 Press RF SEL to display Module Revision information for each channel.
3 Press ENTER to return to the default screen.
3 Press ENTER to return to the default screen.
Checking the Temperature of an RF Module
1 Press OPTIONS until the Temperature screen appears.
2 Press RF SEL to display information for each RF channel.
Note: Each channel displays the temperature of its RF output group.
3 Press ENTER to return to the default screen.
Viewing the Hardware Revision String
The Revision Control screen displays the hardware revision string of the GQAM.
This string is 31 bytes long and is stored in non-volatile memory (NVM). Only eight
characters of the string can be viewed at a time.
This string is 31 bytes long and is stored in non-volatile memory (NVM). Only eight
characters of the string can be viewed at a time.