Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Rack Mounting
78-4019355-01 Rev B
9
Additional Games and Services Application Server Requirements
To install and configure the Games and Services Application Server software, the
Application Server must have a standard keyboard and monitor connected to it.
Removing the Games and Services Application Server from the Rack
Follow these steps to remove the Games and Services Application Server from the
rack.
CAUTION:
Avoid personal injury and damage to this product! Be sure to support the
Avoid personal injury and damage to this product! Be sure to support the
server from underneath while removing it from the rack. Failure to do so
could result in the server falling to the floor. The server could be damaged
and you could be injured as a result.
Note: You do not need to remove the optional front bezel to install or remove the
system from the rack.
1 Turn off the system and attached peripherals.
2 Disconnect the system from the electrical power.
3 Disengage both thumbscrews from the front panel of the chassis.
4 Carefully pull the system forward and out of the rack.
1 Turn off the system and attached peripherals.
2 Disconnect the system from the electrical power.
3 Disengage both thumbscrews from the front panel of the chassis.
4 Carefully pull the system forward and out of the rack.