Cisco Model GS7000 4-Port Node 1 GHz with 55 70 Split Installation Guide
HSIA Diagnostics Page: Traceroute Command
4037424 Rev A
59
HSIA Diagnostics Page: Traceroute Command
The HSIA-Traceroute Web Interface is accessed from the Connection form that is
first displayed when the transponder is accessed.
first displayed when the transponder is accessed.
Click the Traceroute button to view the traceroute diagnostics page. The page
appears as shown in the following example.
appears as shown in the following example.
Input Parameters
Input Parameters
Description
Target IP address or name Either a standard IPv4 dotted-quad address or a host name
is entered. The address entered will be unconditionally
given to the DNS resolver; a dotted-quad will be resolved
the same value, and a name will be resolved to its IPv4
address. The final IPv4 address to be Tracerouted is shown
in parenthesis beside the host field.
given to the DNS resolver; a dotted-quad will be resolved
the same value, and a name will be resolved to its IPv4
address. The final IPv4 address to be Tracerouted is shown
in parenthesis beside the host field.
Traceroute from what
source
source
There are up to three choices, depending on what is
available in the unit:
available in the unit:
Cable Modem: always available
CPE: available if the CPE stack is activated
EMTA: available if the VoIP stack is licensed and
activated
activated
Max hops
Range is 1 to 255; default is 30. Also known as Max TTL,
which is Maximum Time-to-Live.
which is Maximum Time-to-Live.