Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
Chapter 1 Introduction
6
4037424 Rev A
Parts List
The following table lists the transponder and any other items that are available as an
option. For damage or discrepancies, contact your Cisco representative.
option. For damage or discrepancies, contact your Cisco representative.
Description
Part Number Qty
ASSY, MOD, 4X DOCSIS Status Monitor, GS7000.
Includes GS7000 Cable Kit
Includes GS7000 Cable Kit
4036793
1
Spare GS7000 RF Cable Kit (required for cable modem
downstream frequencies above 140 MHz)
downstream frequencies above 140 MHz)
Note: This cable kit is not required for optical hub
integrations.
integrations.
4038028
1
0 dB Pad
574475
1
10 dB Pad
574485
1
Technical Support Contact Information
For technical issues, contact your Cisco representative. See Customer Support
Information (on page 79) contact information.
Information (on page 79) contact information.
Connectors
The transponder includes:
A node interface connector through which the transponder receives its power
and performs all communications
and performs all communications
A label containing the transponder serial number
Downstream RF cable connectors
Six status LEDs
The Craft port, a standard RJ-45 Ethernet connector that provides local access to
the transponder
the transponder
An optical tamper sensor
A pad socket to attenuate the upstream signal from the transponder so that the
transponder can be configured for different implementations
transponder can be configured for different implementations