Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide

 

4037424 Rev A 

9 

 

Cable modem infrastructures are likely to have unique characteristics. 
For this reason, we strongly recommend that you completely install 
one transponder and make it operational before deploying the entire 
system throughout your network. 

Installing the transponders and making them operational consists of 
the following steps, which are explained in detail in this chapter: 



 

Provisioning the transponders in the network 



 

Adding configuration data to the cable modem configuration file 



 

Installing the transponder 



 

Powering the transponder and checking the LEDs for status 

 

 
 



 



 

Your Network Information ................................................................. 11 



 



 

Installing the Transponder .................................................................. 13 



 

Configuring the Transponder Using the SA-HMS-
FIBERNODEGS7000 MIB..................................................................... 21 



 

Downloading Module Firmware Using the CTLP-
DOWNLOAD-MIB ............................................................................... 24 



 

Checking the LEDs ............................................................................... 26