Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
Acquiring the Transponders by the SNMP Manager
4037424 Rev A
33
Acquiring the Transponders by the SNMP Manager
The transponder must first complete its initialization and registration from the Cable
Modem configuration file. The transponder will then send a warm start trap to the
SNMP Manager as specified in the cable modem configuration file. This trap
provides the SNMP Manager with the MAC and IP addresses of the transponder
and should, depending on the configuration of the manager software, initiate
monitoring the fiber node.
Modem configuration file. The transponder will then send a warm start trap to the
SNMP Manager as specified in the cable modem configuration file. This trap
provides the SNMP Manager with the MAC and IP addresses of the transponder
and should, depending on the configuration of the manager software, initiate
monitoring the fiber node.