Cisco Headend System Release 2.7 User Guide
Managing Bandwidth and Service Groups
4019781 Rev B
17
4 Restart the sgManager process.
5 Do you want to enable an additional BFS source?
If yes, repeat this procedure from step 1.
If no, you have complete this procedure
Important: To expand the number of available service groups beyond 2,375,
contact Cisco Services for further assistance.
contact Cisco Services for further assistance.
Enabling Service Group PassThru Messages
In SR 2.7/3.7/4.2 SP2, all Service Group PassThru messages are disabled. To enable
the PassThru (0x8065) message on your system, you must edit the .profile file to add
the environment variable SEND_SG_PASSTHRU=true and then stop and restart
the sgManager process.
the PassThru (0x8065) message on your system, you must edit the .profile file to add
the environment variable SEND_SG_PASSTHRU=true and then stop and restart
the sgManager process.
Note: 0x8065 PassThru messages are sent only when service group hierarchical
changes are made. For example, when parent-child relationships are changed, both
the parent and child service groups are included in the 0x8065 PassThru message.
Therefore, only enable this variable if a hierarchical service group architecture exists
on the system.
changes are made. For example, when parent-child relationships are changed, both
the parent and child service groups are included in the 0x8065 PassThru message.
Therefore, only enable this variable if a hierarchical service group architecture exists
on the system.
Disabling Service Group PassThru Messages
To disable the PassThru message, comment out the entry in the .profile file by
adding a # at the beginning of the line and then restarting the sgManager process.
adding a # at the beginning of the line and then restarting the sgManager process.