Cisco Headend System Release 2.7 Installation Guide
Chapter 8 Configuring the Broadcast File System
114
4017650 Rev C
Set Up the BFS In-Band Source
To send in-band data to the DNCS, you must set up a corresponding source. For
setting up a video source, you can use the Source user interface on the DNCS. To
send out-of-band data in band, you must set up the source using the BFS Admin
user interface.
setting up a video source, you can use the Source user interface on the DNCS. To
send out-of-band data in band, you must set up the source using the BFS Admin
user interface.
To set up the BFS in-band source, complete the following steps.
1 On the DNCS Administrative Console, click the DNCS tab, and then click the
1 On the DNCS Administrative Console, click the DNCS tab, and then click the
Application Interface Modules tab.
2 Click BFS Admin. The BFS Admin Sites window opens.
3 Is there only one site in the headend?
If yes, go to step 5.
If no, go to step 4.