Cisco Headend System Release 2.7 Installation Guide
Create, Modify, or Delete Hubs
4017650 Rev C
31
4 Enter the correct Hub Name, Network ID, and N/W Binding Pkg in the blank
fields.
Notes:
Notes:
Only subscription packages can be used as Network Binding packages. (Only
these packages will be visible in the drop down list.)
these packages will be visible in the drop down list.)
When no network binding package is selected (N/W Binding Pkg = none), a
set-top can operate in that hub without being authorized for a specific
package.
set-top can operate in that hub without being authorized for a specific
package.
5 Select the headend.
6 Click Save. The system saves the hub information in the DNCS database and
6 Click Save. The system saves the hub information in the DNCS database and
updates the Hub Summary window to include the new hub.
Note: The entries are sorted based on the Network ID.
Note: The entries are sorted based on the Network ID.
Modifying a Hub
After you have created and saved a hub, you can only modify the hub name
Important: To change any other parameters, you must delete the hub, and then
re-add it to the DNCS, using the new information. To delete a hub, go to Deleting a
Hub, next in this section.
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
re-add it to the DNCS, using the new information. To delete a hub, go to Deleting a
Hub, next in this section.
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click Hub. The Hub Summary window opens.