Cisco Headend System Release 2.7 Installation Guide
Configure OIT Bridges
4017650 Rev C
69
4 Click File and New and select CMTS/OIT. A Set Up CMTS/OIT Bridge window
opens.
5 Select the Satellite Hub.
6 In the Bridge Name field, enter the name of the bridge.
7 In the IP Address field, enter the virtual IP address for the OIT bridge. You must
6 In the Bridge Name field, enter the name of the bridge.
7 In the IP Address field, enter the virtual IP address for the OIT bridge. You must
use this IP address for this bridge.
8 Select Unicast for the IP Flow Scheme.
9 In the Comment field, enter a description of this bridge.
10 From the DCM drop-down list, select Mixed DOCSIS/DAVIC.
11 To enable OIT Bridges, select the OIT Bridge checkbox in the Set Up CMTS/OIT
9 In the Comment field, enter a description of this bridge.
10 From the DCM drop-down list, select Mixed DOCSIS/DAVIC.
11 To enable OIT Bridges, select the OIT Bridge checkbox in the Set Up CMTS/OIT
Bridge window. The OIT Bridge Params button is now enabled.
Important: You can only create one OIT Bridge per hub.
Important: You can only create one OIT Bridge per hub.
12 Click OIT Bridge Params to enable the bridge. A Set Up CMTS/OIT Screen
window opens.