Cisco Headend System Release 2.7 Installation Guide
Add a Service Source
4017650 Rev C
85
2 Click Source. The Source List window opens.
3 Click File then choose New. The Set Up Source window opens.
4 Click in the Source Name field and type the name you will use to identify this
source. You can use up to 20 alphanumeric characters.
Important: We recommend that you use a naming scheme that indicates the
source type (analog or digital), the channel number the service will use, and the
service name. For example, a source name of D02 WeatherScan indicates that
this is a digital source (D) providing content on channel 2 (02) for the
WeatherScan service.
Important: We recommend that you use a naming scheme that indicates the
source type (analog or digital), the channel number the service will use, and the
service name. For example, a source name of D02 WeatherScan indicates that
this is a digital source (D) providing content on channel 2 (02) for the
WeatherScan service.
5 Click in the Source ID field and type the number you will use to identify this
source.
Notes:
Notes:
Remember the Service Source ID. You will need it as you continue to set up
the service.
the service.
Use the Source ID values that are above 200.