Cisco Headend System Release 2.7 Installation Guide
Run the slotchk Utility
4020695 Rev C
135
Run the slotchk Utility
Follow these instructions to run the slotchk utility.
1 If necessary, open an xterm window on the DNCS.
1 If necessary, open an xterm window on the DNCS.
Important: Skip steps 2 and 3 if you are already logged in to an xterm window
as root user.
as root user.
2 Type su - and then press Enter. The password prompt appears.
3 Type the root password and then press Enter.
4 Type cd /export/home/dncs/check and then press Enter. The
3 Type the root password and then press Enter.
4 Type cd /export/home/dncs/check and then press Enter. The
/export/home/dncs/check directory becomes the working directory.
5 Type ./slotchk.pl and then press Enter.
Results:
The slotchk utility runs and displays the following information on the screen:
–
–
The PCI card configuration found on the DNCS server
–
Whether the configuration passes or fails.
A logfile is generated in the /export/home/dncs/check directory that also
reports on the PCI card configuration.
Note: The logfile is named slotchk.log.
reports on the PCI card configuration.
Note: The logfile is named slotchk.log.
6 Contact Cisco Services for instructions on how to send them the logfile.