Cisco Headend System Release 2.7 Installation Guide
DBDS Utilities Installation Instructions
4020695 Rev C
3
DBDS Utilities Installation Instructions
Follow these instructions to install the latest version of DBDS Utilities onto the
DNCS and Application Server.
DNCS and Application Server.
Notes:
You do not need to stop the system components before installing the DBDS
Utilities.
Utilities.
You should be able to install the DBDS Utilities in about 20 minutes.
1 Open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
2 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
3 Insert the DBDS Utilities CD into the CD-ROM drive of the DNCS.
4 Type df -n and then press Enter. A list of the mounted filesystems appears.
4 Type df -n and then press Enter. A list of the mounted filesystems appears.
Note: The presence of /cdrom in the output confirms that the system correctly
mounted the CD.
mounted the CD.
5 Type cd /cdrom/cdrom0 and then press Enter. The /cdrom/cdrom0 directory
becomes the working directory.
6 Type ./backout_dbds_utils and then press Enter. The system lists the DBDS
Utility packages it plans to remove and displays a confirmation message.
7 Type y and then press Enter. The system removes existing DBDS Utility
packages.
8 Type ./install_dbds_utils and then press Enter. The system displays a Checking
the system, please wait ... message.
9 Wait for the xterm window to update with the following message:
DBDS Utilities installation complete
Be sure to review for errors and save a log file!
dbOptimizer cron entries are no longer configured
by package installation. You must run
/dvs/dncs/bin/setDbOptCron if you wish for
dbOptimizer to run automatically.
Note: The installation log file is stored in the /dvs/dncs/tmp directory.
Be sure to review for errors and save a log file!
dbOptimizer cron entries are no longer configured
by package installation. You must run
/dvs/dncs/bin/setDbOptCron if you wish for
dbOptimizer to run automatically.
Note: The installation log file is stored in the /dvs/dncs/tmp directory.
10 Type cd and then press Enter. The home directory becomes the working
directory.