Cisco Headend System Release 2.7 Installation Guide
Appendix C
DBDS Utilities Version 6.1 Removal Procedure
208
4020695 Rev C
Remove DBDS Utilities Version 6.1
Follow these instructions to remove DBDS Utilities Version 6.1 from your system.
Important: Do not remove DBDS Utilities from your system without first calling
Cisco Services. Cisco Services engineers may be able to troubleshoot any conditions
that may have caused you to consider removing DBDS Utilities.
1 Open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
Cisco Services. Cisco Services engineers may be able to troubleshoot any conditions
that may have caused you to consider removing DBDS Utilities.
1 Open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
3 Insert the CD labeled DBDS Utilities 6.1 into the CD-ROM drive of the DNCS.
4 Type df and then press Enter to confirm that the system mounted the CD
4 Type df and then press Enter to confirm that the system mounted the CD
successfully. The last line of the df command output lists the number of free disk
blocks on the CD.
Note: The number of free disk blocks existing on the CD does not matter. The
fact that the CD is listed in the df command output verifies that the system
successfully mounted the CD.
blocks on the CD.
Note: The number of free disk blocks existing on the CD does not matter. The
fact that the CD is listed in the df command output verifies that the system
successfully mounted the CD.
5 Type ./backout_dbds_utils and then press Enter.
Note: Be sure to type ./ before typing backout_dbds_utils.
Results:
Results:
The system displays a list of the utility components it will remove.
A confirmation message appears.