Cisco Headend Digital Broadband Delivery System Installation Guide
Load the Database
4020695 Rev C
71
8 Type cd [directory name] and then press Enter.
Example: cd /dvs/backups/db_dir.12.15.00_08.45
Notes:
Notes:
Substitute the complete path and directory name of where you previously
unloaded your database.
unloaded your database.
You recorded the path and directory name in Unloading the Database to the
Hard Drive (on page 62).
Hard Drive (on page 62).
9 Type showActiveSessions and then press Enter. A display showing any active
DNCS sessions appears.
10 Are there any active DNCS sessions?
If yes, type one of the following commands:
–
–
To kill all active sessions at once, type killActiveSessions and then press
Enter; go to step 11.
Enter; go to step 11.
–
To kill each process individually, type kill [PID] and then press Enter,
where [PID] is the process ID associated with the active session; go to
step 11.
where [PID] is the process ID associated with the active session; go to
step 11.
If no, the DNCS will display a message similar to dncsDbServer is idle; go to
step 11.
step 11.
11 Choose one of the following options:
If you are loading the DNCS database from the hard drive of the DNCS, type
dncsDbData -l and then press Enter.
dncsDbData -l and then press Enter.
If you are loading the Application Server database from the hard drive of the
DNCS, type
dncsDbData -l -d appdb -c /dvs/appFiles/dbConfig/appDbConfig and
then press Enter.
DNCS, type
dncsDbData -l -d appdb -c /dvs/appFiles/dbConfig/appDbConfig and
then press Enter.
Note: The directory path following the -c option specifies the location of the
appdb configuration files.
Result: The Load Database window appears.
appdb configuration files.
Result: The Load Database window appears.
12 Type 2 and then press Enter. The Is the above information correct? (Y/N)
message appears.
13 Type y and then press Enter. The Enter backup directory (Default: Current
Directory) message appears.
14 Press Enter. The Is the above information correct? (Y/N) message appears.
15 Type y and then press Enter. The database loads from the hard drive.
16 When the database has loaded, follow the procedures in Appendix B, Restarting
15 Type y and then press Enter. The database loads from the hard drive.
16 When the database has loaded, follow the procedures in Appendix B, Restarting
System Components (on page 203), to restart the DNCS, the Application Server,
and Spectrum.
and Spectrum.
17 Type /etc/rc2.d/S75cron start and then press Enter. The system restarts its cron
jobs.