Cisco Headend System Release 2.7 Installation Guide
Appendix C
Backup and Restore the DTACS File System and Database
164
78-4036705-01 Rev D
10 Type boot <physical device path for the DVD>/disk@0:f – SAshell at the ok
prompt and press Enter to boot the system in SAshell mode. In the example
shown, you would type:
Example: boot
/pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@3/disk@0:f -
SAshell
Important:
shown, you would type:
Example: boot
/pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@3/disk@0:f -
SAshell
Important:
Be sure to type a space before and after the – character in this command.
Do not press Enter until you have typed the entire command to the end
(SAshell). The command may wrap around to the next line, as shown in the
following example.
(SAshell). The command may wrap around to the next line, as shown in the
following example.