Cisco Headend System Release 2.7 Installation Guide
Chapter 3 Installing the DTACS Software for the First Time
16
78-4036705-01 Rev D
Connect to the Console of the DTACS Server
Important: For initial installation, you should use the ILOM port to connect from a
laptop to the serial management port of the DTACS server.
laptop to the serial management port of the DTACS server.
Connect to the Console Via the ILOM Port
Complete the following steps to open a secure shell session and connect to the
console of the DTACS server.
1 At the => prompt, type start /SP/console -f and press Enter. A message asks if
console of the DTACS server.
1 At the => prompt, type start /SP/console -f and press Enter. A message asks if
you want to start the console.
2 Type y for yes and press Enter. A message indicates that the console has started
and instructs you to type #. to exit the console.