Cisco Headend Digital Broadband Delivery System Installation Guide
Chapter 7 Provision DTACS
126
78-4036705-01 Rev D
2 Press the Tab key to go to the fields you want to add. The following table
describes the fields that can be added on this page.
Note: Any changes made to this screen do not affect CVTs that were created by
the Image Association page.
Note: Any changes made to this screen do not affect CVTs that were created by
the Image Association page.
Configuration Field
Description
Load CVT2 Image Metadata
to File
to File
The unique name of the CVT entry you are creating. This
name will appear in the File Path column on the CVT
Management window.
name will appear in the File Path column on the CVT
Management window.
Image Name
The name of an image file in the /dvs/dtacs/pub directory
on the DTACS Server.
on the DTACS Server.
Vendor ID
The vendor ID of the CVT in AABBCC format.
Hardware Version ID
The hardware vendor ID of the DTA in AABBCCDD format.
Transmission State
Determines whether this CVT is being transmitted. Select
either Off or On.
either Off or On.
Location Type
Specifies the location of the download code. Select one of
three options:
three options:
Source ID
Frequency, Packet ID, Modulation Type
Frequency, MPEG Program Number, Modulation Type
Source ID
The source of the program.
MPEG Program Number
The MPEG program number that corresponds to this CVT.
Packet ID
The PID that corresponds to this CVT.
Frequency
The frequency (in MHz) used to transmit the CVT to the
DTAs. Valid values are in 0.25 MHz intervals.
DTAs. Valid values are in 0.25 MHz intervals.
Modulation Type
The type of modulation used for this CVT. Select either
QAM64 or QAM256.
QAM64 or QAM256.