Cisco Headend System Release 2.7 Installation Guide
Run the runCvtGroup Utility
740020 Rev H
163
5 Click File and then select New. The Set Up DHCT Group window opens.
6 Follow these instructions to configure the Set Up DHCT Group window.
a Type an unused group ID in the Group ID field.
b Type a name for the group in the Group Name field.
c Type the MAC address of a DHCT that you want in the download group in
b Type a name for the group in the Group Name field.
c Type the MAC address of a DHCT that you want in the download group in
the DHCT MAC Address field.
d Click Add.
e Repeat steps c) and d) for any other DHCT that you want to belong to the
e Repeat steps c) and d) for any other DHCT that you want to belong to the
download group.
f Click Save.
7 If necessary, open an xterm window on the DNCS.
8 Type runCvtGroup [group ID] [file name] and then press Enter. The system
8 Type runCvtGroup [group ID] [file name] and then press Enter. The system
assigns the DHCTs in the text file to the specified download group.
Example: Type runCvtGroup 2 /tmp/runCvtGroup-in_03.04.03 and then press
Enter to assign the DHCTs in the text file to download group 2.
Notes:
Example: Type runCvtGroup 2 /tmp/runCvtGroup-in_03.04.03 and then press
Enter to assign the DHCTs in the text file to download group 2.
Notes:
Refer to Appendix F, Guidelines for Text Files Used in DNCS Utilities (on
page 243), for instructions on preparing a text file for use with the
runCvtGroup utility.
page 243), for instructions on preparing a text file for use with the
runCvtGroup utility.
Substitute the ID of the download group for [group ID].
Substitute the name of the text file for [file name].